Gary
I believe there are multiple answers to this question just like
there are several ways the Jack and Brace are placed.
I only have the small clips on the Brace and 3 large clips on the Jack but I
don't know that is absolutely correct.
I have seen pictures that look like there is a medium clip on the big end of
the Brace with 2 small clips on the handle.
The size of these clips and placement could be almost as random as Tiger
engine # install.
The Parts Lists does not list these clips as far as I know.
Ron Fraser
-----Original Message-----
From: Tigers <tigers-bounces@autox.team.net> On Behalf Of GARY WINBLAD
Sent: Friday, December 17, 2021 11:58 AM
To: JAMES ARMSTRONG <rollright@aol.com>; JAMES ARMSTRONG via Tigers
<tigers@autox.team.net>
Subject: Re: [Tigers] Tigers Digest, Vol 14, Issue 386. Trunk jack clips
> On 12/16/2021 2:20 PM JAMES ARMSTRONG via Tigers <tigers@autox.team.net>
wrote:
>and one large one. The large one is for the part of the lifting jack that
is inserted into the body channels of the car.
Is that right?
I am pretty sure mine in B9470622 are original. All 3 for the jack seem to
be the same.
A larger one for the smaller arm doesn't make sense...?
Gary
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|