The Fram - 3727 looks to be a really common GM filter from the 80's and 90's
cars and truck, likely for EFI pump in the tank cars. The fitting might be
reverse flare like on brake lines, but not 100%. Check summit racing for nice
filters in the $25 price range, they have some decent summit brand onces as
well
as other larger inline filters that look pretty good.
Sandy
-----
Original Message ----
From: Jerry Mo Christopherson <JCMC2006@suddenlink.net>
To: rfraser@bluefrog.com; Joel Martin <jmartiniii@yahoo.com>
Cc: Tiger List
Serve <Tigers@autox.team.net>
Sent: Fri, November 30, 2012 3:49:11 PM
Subject:
Re: [Tigers] Photo Gallery
A filter that I use (with 3/8 tubing) is Fram
#3727, when you see it you'll
see why, very large inlet and outlets. The
problem is the type of fitting
that you have to use on both ends. It's not a
simple pipe thread or normal
flared fitting. I have no idea what car the
filter is designed for, but I
took it down to the local hydraulic supply house
and was able to get an
adapter for each end that allowed me to end up with an
AN fitting on both
ends that I was able to connect my tubing to.
Perhaps
someone on the list knows just what type of fitting it's designed
for. They
are sold at Wal-Mart.
I've had it on the car for more than ten years.
Jerry Christopherson
9473187
-----Original Message-----
From:
tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf
Of Ron Fraser
Sent: Thursday, November 29, 2012 3:55 PM
To: 'Joel Martin'
Cc:
'Tiger List Serve'
Subject: Re: [Tigers] Photo Gallery
Joel
Sometimes the
picture gallery of Tigers for sale show undercarriage;
you might want to look
for any Tiger listed online.
The original fuel filter for both Mk I and
II is C2RZ-9155-A with
clinch type hose clamps. Today's equivalent is Fram G2
for 5/16" fuel line.
You would need a different filter for the 3/8" line. I
believe I have a
picture of the stock location of the fuel filter for a MK I.
I will do a
search and send separately.
Ron Fraser
-----Original
Message-----
From: tigers-bounces@autox.team.net
[mailto:tigers-bounces@autox.team.net]
On Behalf Of Joel Martin
Sent:
Thursday, November 29, 2012 3:28 PM
To: Buck Trippel
Cc: Tiger List Serve
Subject: Re: [Tigers] Photo Gallery
Buck
Thanks for the update - any
pictures at all regarding brake and fuel line
routing. That is next on my
list to install while I have access to a lift
and before I have to move car
from paint\body shop.
I bought the brake line kit from SS and plan to up the
fuel line size from
5/16" to 3/8" due to 65 HiPo motor and thinking about a
Holly Red electric
fuel pump 12-801-1 with a fuel filter before inlet and one
at the 'front
right side of of engine' but not sure where that is and which
filters would
be period correct.
Any ideas or pictures to get me over the
hump.
Again, thanks for the reply.
Joel
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/tigers/jcmc2006@suddenlink.net
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/tigers/sganz@pacbell.net
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|