The pulley I have has no visible markings. It measures 6 1/8" overall
diameter with 1 groove which is 1 1/4" from mounting surface. It measures 1
9/16" from mtg surface to outermost edge.
Bob H
----- Original Message -----
From: " Ron Fraser" <rfraser@bluefrog.com>
To: "'MAURO D'ANGELO'" <m_dangelo@verizon.net>
Cc: <tigers@autox.team.net>
Sent: Sunday, January 31, 2010 5:06 PM
Subject: Re: [Tigers] Tiger Pulley Part Number
> Mauro
>
> The pulley on the crank C4JZ-6312-A
> The pulley on the water pump is C4JZ-8509-A
>
> These are the Ford part numbers you would use to order one at the parts
> counter and on the packaging for the part.
> These numbers are rarely on the part itself. The parts might have an
> engineering number and a date code number and generally a Ford logo.
>
> I don't have either pulley handy to examine for markings.
>
> Ron Fraser
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|