Hi Group. I have a MKI and the nut on the bent rod on the hood release
that attaches to the lever to release the hood latch must have come
loose. Therefore I can not open the hood.
I went to the Tigers United site, and tried the coat hanger through the
firewall/heater plenum area, and could not hook the lever to release the
latch.
I took the 8 bolts out of the front hinges for the hood, and do not have
room to get to the latch to release the latch as well.
So, any solutions or tricks would be most welcome.
Thanks
Larry
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|