Find a machine shop with a "sinker" EDM (electro discharge machine)
They will be able to "burn out the easy out and leave the stud alone. They can
also burn out the stud and then pick the little bit of "coil spring" left of
the threads.
Erich
---- "James E. Pickard" <geowiz.sgy@cox.net> wrote:
> Anybody have a suggestion for removing an easy out (great misnomer) that has
> broken off flush with the surface? Heat is not an option. Will anything
> grind up one of these things? Thanks.
>
> Jim Pickard
> B9473298 ('65 Tiger)
> AN5L/12109 ('59 Sprite) - sold
> 2003 Mini Cooper
> Lafayette, LA
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as e.coiner@cox.net
>
> Tigers@autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|