I heard/read somewhere that the initial run of the distributors from
Pertronix for SBFs had a dimensional flaw that fits the description that
you have given. I suggest you contact Pertronox and see what
recommendations they may have to offer.
Otherwise, from my experiences, they have a very good line of products
and they stand behind them.
Jere
-----Original Message-----
From: tigers-bounces+jteepen=usatoday.com@autox.team.net
[mailto:tigers-bounces+jteepen=usatoday.com@autox.team.net] On Behalf Of
Rense, Mark (GE Indust, ConsInd)
Sent: Monday, April 07, 2008 9:00 AM
To: tigers@autox.team.net
Subject: [Tigers] After-Market Distributor
I would like to replace my original dual-point distributor (with
Pertronix trigger) with a more modern unit with vacuum advance. Trouble
is, the one I bought (Pertronix D130700) is just enough larger in
housing diameter that it does not clear the F4B manifold.
Anyone running a F4B and aftermarket distributor?
Bugz
_______________________________________________
S
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|