Disconnected e-brake, loosened nuts holding adjuster. Still locked up
everything loose drum moves but locked to brakes. Got PB blaster and soaked
adjuster bolt. Made a 1/4 inch square socket by using a 4mm 1/4" socket and
forcing
on a 9/16 nut then Mig weld nut to socket. Using a 9/16 socket and 3/8 drive
ratchet backed off adjuster bolt. Drum is off, time for brake rebuild. Any
suggestion on where to acquire parts for this?
Thanks to all listers for your help.
What am I going to do without that 4mm socket?
LEE B382002560
**************************************See AOL's top rated recipes
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|