tigers
[Top] [All Lists]

Airfilter

To: <cjcoffel@sonic.net>
Subject: Airfilter
From: "Ronak, TP \(Timothy\)" <Timothy.Ronak@crna.akzonobel.com>
Date: Mon, 20 Mar 2006 17:36:01 -0500
Listers,
Also note that a standard Gauze type 15 inch diameter 'Summit" brand
filter will work as well. Height will be dependent on whether you have a
stock intake or whether you have an aluminum one but with my Aluminum
airbox I have a 2 Inch tall 15 inch diameter unit fitted under the hood
squeezed into the stock filter lid. The 2 inch height permits a lot more
air over the 1.5 inch unit as you only have an effective 1 inch of
filter height due to the 'wicking' of the rubber into the gauze. The new
Brands seem to be paying more attention to this and seem to be cleaner
at the edge of the filter gauze.

Best Regards,

Tim Ronak
Business Development Manager
Akzo Nobel Coatings
23961 Via El Rocio
Mission Viejo, CA   92691
Off: (949) 305-5393
Fx: (425) 955-6268
Cell: (949) 289-3357
Business email: timothy.ronak@crna.akzonobel.com
Personal email: timronak@cox.net
VM: (800) 234-6747 ext. 2257#

This message, including attachments, is confidential and may be
privileged. If you are not an intended recipient, please notify the
sender then delete and destroy the original message and all copies. You
should not copy, forward and/or disclose this message, in whole or in
part, without permission of the sender.




<Prev in Thread] Current Thread [Next in Thread>
  • Airfilter, Ronak, TP \(Timothy\) <=