Steve-
The stock lug is a 7/16" x 20 thread (national fine). I understand that
some folks have upgraded to 1/2". The Panasport takes a standard
tapered lugnut, not the curved taper like the original lugnut and
wheel. I was able to buy them at my local auto parts store. The ones I
bought were from "Mr. Lugnut". They made two versions with that
thread. One took a 3/4" wrench and the other took a 13/16". You want
to make certain to get the 3/4" ones. Otherwise your socket will not
fit down inside the hole in the Panasport. Sorry I don't have the Mr.
Lugnut part number.
-Randy
Tiger- B382000189
fastsage@cox.net wrote:
> Hello Sunbeamers:
> I need some new lug nuts to go with my Panasports on the Tiger. I'm
> going to have to order them from Summit or someone like it, so I can't
> bring one into a store to match it up. Can anyone tell me what size
> thread, etc., I need to get?
>
> Thanks!
> Steve Sage
|