Re: Removing a Valve seal and Spring retainer

[Drmoonstone@aol.com]

In a message dated 12/19/03 5:32:08 PM, Timothy.Ronak@AkzoNobel.com writes:


> Be VERY careful to not
> hit the Valve tip with the hammer or it may very well eat the rocker tip.
> Installation of a positive valve seal may be impossible to do with out
> damaging it as a sharp edge develops on the edge of the retainer groove.
> 

To avoid this problem a dead blow hammer works well....speaking from one 
negative experience and several positive ones.

Moonstone