I've been useing a Facet fuel pump. Rather pricey (>$80) but seems to
work well, and is pretty quiet (I can hear it ticking which reassures
me..)
NAPA used to stock them, the NAPA part # is: 610-1014.
My first one was defective (crapped out in 4 months) but it was replaced
at no cost, and has been fine ever since...(a little over a year and
about 3k miles)
Bill Goebner wrote:
>
> I now have an aftermarket no-name very noisy fuel pump that I want to replace.
> Someone told me that a Mallory pump is a very good one to get but I haven't
> been able to easily find one yet.
>
> Is that a good one or is there another reliable, quiet pump that I should use?
> I'd like to get a model number too if possible.
>
> Since this is my third pump, I'm thinking of doing what Tom Hall has done
>which
> is install two pumps with switch over plumbing and electrical. Tom is looking
> for a good check valve for one way flow to make the switch over easier without
> a manual valve. Any ideas on this?
>
> Thanks,
> Bill
--
Ken Tisdale Sr. Sales Engineer
Pulsecom 303-403-1968
ktisdale@ix.netcom.com FAX: 303-432-8967
ken.tisdale@pulse.com
|