Thanks Frank
------Original Message------
From: Frank Clarici
To: Steven Guterman
Cc: Bill Masquelier
Cc: spridgets
Subject: Re: [Spridgets] Bugeye door hinge
Sent: Sep 24, 2010 7:30 PM
On 9/24/2010 6:37 PM, Steven Guterman wrote:
> Does anyone know the difference and if you can use the later hinges on an
> early (1959) bugeye.
Side curtain cars used one type of hinge, roll up window cars used a
different hinge. I think the hinges are the same but the early cars used
a 1/4 x 28 pan head screw where the later cars used a 5/16 x 24 bolt on
the door end of the hinge.
All used pan head 1/4 x 28s on the hinge to body.
So later hinges might work but with the bolts which might mean drilling
a larger hole in the door where the rubber plugs go so you can get to
the bolts.
--
Frank Clarici
Toms River, NJ
Sent from my Verizon Wireless BlackBerry
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|