If it's like most of the GM OBD1 cars out there, you should be able to
put a jumper on two of the pins on the connector and the Check Engine
Light will flash the codes. I don't know which pins, so you'll need to
Google it, but I remember doing this on a friends old 84 Camaro and it
worked fine.
Good luck.
-=Chris
Chris King
http://home.comcast.net/~kvcbk/
<-----Original Message----->
>From: Linda Grunthaner [grunthaner@gmail.com]
>Sent: 9/4/2010 6:57:31 AM
>To: spridgets@autox.team.net
>Subject: Re: [Spridgets] OBD I........... where can I find one?
>
>List,
>I have been looking a few years for an OBD I for my 1994 Saturn but
can't
>find one. Does anyone know where I can get one they must have made them
>before 96. I have purchased & returned an OBD II in the past as it said
it
>only worked on a 96 and above.
>Thanks Lin
>PS I need my check engine light on like I need another hole in my head.
>_______________________________________________
>
>Donate: http://www.team.net/donate.html
>Suggested annual donation $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/spridgets/cbking@alum.rpi.edu
>
>.
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|