Thanks Kevin. I think I have a can of that at home from when I had to rebuild
the wooden frame in our motorhome door. Used it to re attach the outer
aluminum skin.
Rich Ball
'76 Midget
Everett, WA
----- Original Message -----
From: Kevin Valentine
To: Richard Ball
Cc: spridgets@autox.team.net
Sent: Wednesday, February 17, 2010 6:23 PM
Subject: Re: [Spridgets] Top/Header Rail question
On Feb 17, 2010, at 7:44 PM, Richard Ball wrote:
What contact adhesive have you used? 3M 77?
I have always used Dap Weldwood Contact Cement. Follow the directions and
it will stay stuck where you put it ;) Make sure you have it positioned
correctly before you let the material touch the frame, it will stick as soon
as it makes contact.
The link below will take you to a picture of the can. You should be able
to buy it at any hardware store or home center.
Kevin V.
Dap 00272 Weldwood The Original Contact Cement 1-Quart
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|