spridgets
[Top] [All Lists]

Re: [Spridgets] mis-fire quickie...

To: <spridgets@autox.team.net>
Subject: Re: [Spridgets] mis-fire quickie...
From: <corvallis@peoplepc.com>
Date: Sat, 18 Jul 2009 08:56:21 -0700
Start simplest, cheapest and work up.
Check plugs, plug wires. 
Wires can sometimes be checked at night, outside in the dark for corona and
sparks jumping.
...bill in oregon
==================================================
-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net] On Behalf Of Dave G.
Sent: Saturday, July 18, 2009 8:44 AM
To: spridgets
Subject: [Spridgets] mis-fire quickie...

Could an occasional mis-fire at higher rpm's  - once or twice every 
second or so at 3,000 rpm, not regular - be caused by bad gap or poor 
contact surface in the points in the dizzy??
I can see the stutter in the timing light when the inductive pickup 
is placed on the HT lead of the coil.
I'd like to get an opinion before I go ahead and pull the dizzy..

Thanks
--
Dave G.   KK7SS
'65 MK III Sprite in Richland, WA
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>