spridgets
[Top] [All Lists]

Re: [Spridgets] Tie Rod End removal?

To: spridgets@autox.team.net
Subject: Re: [Spridgets] Tie Rod End removal?
From: "Dave G." <dmg@bossig.com>
Date: Sat, 10 May 2008 19:33:53 -0700
Like Frank says...
But I've held a hammer to one side and hit it with another hammer hard on 
the other side...
It helps if you have a lovely assistant to hold a pry bar between the rod and 
the arm...
It helps you... not the tie-rod...

On 10 May 2008 at 22:30, Frank Clarici wrote:
>> I have heard 
>> but never tried the smack both sides of the arm with 2 hammers at the
>> same time. This shocks the arm enough to release the tie rod end.

--
Dave G.   KK7SS
'65 MK III Sprite in Richland, WA
"Real stupidity beats artificial intelligence every time."
    Terry Pratchett, 'Hogfather'
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>