Hello,
Well, the engine 1500cc is back in the car and I started it today...
The first thing that I noticed was that heat was generating WAY fast (in
fact, despite wanting to run it for 20 minutes on the first run as
needed for the new cam, I stopped at 15 due to the niddle hitting the
red line in temperature)...
The main reason for the overheating, I think is the advance, namely
around 40 degree before!!!
The problem, is that if I put the timing back to 10 degree were it
should be (roughtly), the engine stops and will not start...
So, any ideas of what could be going wrong? Where to check? I am at
lost....
Thanks, cyrille
|