APT has a "How To" item on thier web site on installing a "Top Dead
Center Timing Mark" on the front engine plate before installing an
engine. Just go to www.aptfast.com and go to the parts directory and
click on "How To" in the left frame. One of the how to articles is "Top
Dead Center Pointer".
Mike MacLean
60 Sprite
56 BN2
David Lieb wrote:
>>Hello,---before I put the 1275 in the BI I was going to re-position the
>>timing mark to a better place where I can see it without standing on my
>>
>>
>head.
>
>I had Bill Perry put a tab on the upper side for me when he rebuilt my
>engine. When I requested it, he told me that it was a fairly common request
>(imagine that) and that he was strongly considering making it a standard
>feature of his rebuilds. He also cut four grooves in the damper at 0, 10, 20
>and 30 degrees.
>David Lieb
|