http://ado13.com/redcar/bugeyeweber.jpg
This setup is with the Cannon manifold. I used the dash end of an old choke
cable. Drilled out the hole in the manifold tab so that the choke cable
guide would fit through it, drilled out the hole in the choke cable guide so
that the end of the throttle cable would go into the hole but not all the
way through to act as a stop.
If you want to put the nut on the choke cable guide (I did not) to lock it
into the manifold, you will need to grind the backside of the manifold tab
to make room for the nut and to expose more of the thread on the choke cable
guide.
Larry Miller
----- Original Message -----
From "shelden" <shelden3 at pldi.net>
To: <spridgets@autox.team.net>
Sent: Thursday, October 18, 2001 10:34 AM
Subject: throttle set up
> Hello,
>
> Just received my Cannon manifold and it is bolted on to my DCOE. Now it
> came with a lever arm to attach a bolt/nut combo to hold the throttle
cable.
> But it doesn't seem to me that this will really work well, since when you
> push the gas peddle the cable flexes. I'm looking for ideas on what
others
> hve done with there DCOE setups i'm not looking to spend mega dollars on
> linkages etc. If htere are web pages or if someone wants to send pics
that
> would be great. My address is:
> shelden3@pldi.net
>
> Thanks,
> Charlie
> 71 Midget
|
