----- Original Message -----
From Bob Spruck <bspruck at PROFSERV.AMSOFTWARE.com>
To: Robert Sexson <rsexson@excite.com>; <spridgets@autox.team.net>
Cc: <rsexson@custom.net>
Sent: 19 February 2001 17:21
Subject: RE: Rear hub bearing nut
> Yes, the hub nuts are "handed", just like wire wheel knock-offs. About the
> only way to get them on/off is with a 1 7/8 " socket. It is almost
> impossible with an open end wrench, slip-joint pliers, etc.
Normal nut is marked MOWOG, whilst the opposite-direction-from-normal is
marked UNSHF
|