I've never had any problems either, but you might want
to invest in a set of "shorty" wrenches. My
favorites. And no height jokes please.
Ron
5'7 when it's warm and I'm stretchy
--- Chuck Ciaffone <chuckc@attglobal.net> wrote:
> I'm not sure I really understand the problem.
>
> On my 1275, I loosen/tighten the dizzy clamp using a
> 7/16
> deep socket on a long extension approaching from the
> front of
> the engine at an angle. The nut on the dizzy clamp
> faces forward and
> up at an angle. The socket and shaft fit nicely
> between the oil
> bypass pipe and the side of the block.
>
> chuck
>
>
=====
Ron Soave
"A Fool and His Money Can Throw One Hell of a Party"
1960 Bugeye
1972 BGT
|