| To: | robert weeks <robert@woozy.com> |
|---|---|
| Subject: | Re: rough running midget |
| From: | Valentine <valntine@postoffice.ptd.net> |
| Date: | Sat, 23 May 1998 01:05:18 -0400 |
| Cc: | mgs@Autox.Team.Net, spridgets@Autox.Team.Net |
| References: | <v03007801b18be19f721f@[206.240.43.80]> |
| Reply-to: | Valentine <valntine@postoffice.ptd.net> |
| Sender: | owner-spridgets@Autox.Team.Net |
Robert, I had a similar problem, turned out to be the rivited connection of the spade terminals on the coil. When cold they were relatively tight, but when it warmed up they were loose enough to loose conductivity. I used Frank C's remedy; Tap the rivets with a punch to draw them tight. It has been fine ever since. Kevin Valentine |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Does it ever end ???, Mymgmidget |
|---|---|
| Next by Date: | Replacing S.U. Throttle Shafts, George Procyshyn |
| Previous by Thread: | Re: rough running midget, robert weeks |
| Next by Thread: | Re: rough running midget, robert weeks |
| Indexes: | [Date] [Thread] [Top] [All Lists] |