spridgets
[Top] [All Lists]

Re: Rear Gear Tooth Count 4 Ratio?

To: "Jay Quinn" <jpquinn@cyberramp.net>, <british-cars@Autox.Team.Net>, <spridgets@Autox.Team.Net>, <mgs@Autox.Team.Net>, <healeys@Autox.Team.Net>
Subject: Re: Rear Gear Tooth Count 4 Ratio?
From: "Mike Gigante" <mikeg@vicnet.net.au>
Date: Tue, 5 May 1998 13:03:54 +1000
Reply-to: "Mike Gigante" <mikeg@vicnet.net.au>
Sender: owner-spridgets@Autox.Team.Net
A list of all the spridget diff ratios, sources, and no of teeth are
listed in the article at

http://www.cgl.rmit.edu.au/~mg/cars/goblins/tech/diffs.htm

Mike

-----Original Message-----
From: Jay Quinn <jpquinn@cyberramp.net>
To: british-cars@autox.team.net <british-cars@autox.team.net>;
spridgets@autox.team.net <spridgets@autox.team.net>; mgs@autox.team.net
<mgs@autox.team.net>; healeys@autox.team.net <healeys@autox.team.net>
Date: Monday, May 04, 1998 2:46 AM
Subject: Rear Gear Tooth Count 4 Ratio?


>Is it possible for me to count the number of teeth
>on the ring as well as the pinion gears and come up
>with the ratio?
>
>If so, then whats the ring gear and pinion gear
>tooth count numbers to determine the ratio for 4.22:1,
>3.9:1 and 3.7:1?
>
>TIA,
>
>Q
>
>


<Prev in Thread] Current Thread [Next in Thread>