Elliott, Patrick wrote:
> I have hit upon a small snag in my plans to conquer the world with my
> Sprite.
> I have a '62 MKII with the original Master cylinder (Small Bore). And
> have put in a 1275 with a rib case transmission ('67), which by the way
> has the slave that came with it. I don't have the '62 slave. Apparently
> the steel line ran from the MC directly to the slave. The later year
> used a flex line at the Slave end.
>
> A does not fit B. I went to NAPA (No Auto Parts Available) and they said
> "you can't do it".
>
> I know I'm am not the first to does this. What do I need?.
You need the fitting that fits the later slave.Cut the original line, place
correct fitting on line, double flare the clutch line.
I do not know the size of the later fitting.
Maybe someone on this list knows or can provide you with and old one.
--
Frank Clarici
Seeing all of you at Sprite Rush 98
For more info on Sprite Rush, the 40th anniversery of the Sprite
Check out my home page http://www.exit109.com/~spritenut
------------------------------------------------------------------
|