Inner and outer front wheel bearings are a slip fit onto the shaft. Mainly
because they must be removed periodically for repacking. The outer one comes
out with the hub, as the inner normally will. Be sure to have a fresh pair
of seals handy, too...
Scott
----- Original Message -----
From: "Frank Drummond" <frandrum@voicenet.com>
To: <spitfires@autox.team.net>
Cc: <fdrummond@d2computers.com>
Sent: Thursday, June 21, 2001 7:27 AM
Subject: Spit Front Wheel Bearings
> Hi Listers,
>
> Are the front wheel inner aand outer bearings pressed on to the shaft or
> are they simply a snug fit. My real question is can I change them
> myself or do I need to have some special equipment to do the job.
>
> Once again, this message will self destruct five seconds after ....
>
> Thanks guys and gals,
> Frank D.
> 72 Spit MKIV
/// spitfires@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe spitfires
///
|