spitfires
[Top] [All Lists]

RE: clutch bleeding on 1500

To: Carter Shore <clshore@yahoo.com>
Subject: RE: clutch bleeding on 1500
From: Andrew Mace <amace@unix2.nysed.gov>
Date: Mon, 10 Jan 2000 15:36:26 -0500 ()
> --- "Simmons, Reid W" <reid.w.simmons@intel.com>
> wrote:
> .....
> > There is also a heavy steel cable attached to the front of the bell
> > housing on one end and the frame on the other....

On Mon, 10 Jan 2000, Carter Shore replied:

> DO NOT FORGET to put that 'steel cable' back! It's not steel,
> its plated copper wire....

Carter, I believe you might be confusing a ground strap with the restraint
strap fitted to some later Spitfire 1500 models?

--Andy

* * * * * * * * * * * * * * * * * * * * * * *
* Andrew Mace, President and                *
*   10/Herald/Vitesse (Sports 6) Consultant *
* Vintage Triumph Register <www.vtr.org>    *
* amace@unix2.nysed.gov                     *
* * * * * * * * * * * * * * * * * * * * * * *



<Prev in Thread] Current Thread [Next in Thread>