Re: New carb setup

["Ken C" <kenwc@pacbell.net>]

Tony, you're right. The plugged port must be the one normally the ECV goes
to. BTW, which one do you use, Vicky Brit shows a couple of different ones
available.

Dave, guess I'll leave the canister in place. Boy, coulda saved all that
weight too !! <BG>

OK, opened up that port, (just a freeze plug), and it's about a 1/2"
non-threaded hole into the manifold. So now just have to figure out the best
way to connect the ECV to the manifold and another part of the puzzle will
have been solved !!