spitfires
[Top] [All Lists]

Re: water injection

To: "Simmons, Reid W" <reid.w.simmons@intel.com>
Subject: Re: water injection
From: Joe Curry <spitlist@gte.net>
Date: Wed, 18 Aug 1999 14:04:26 -0700
Reid,
I have water injection on Huxley the Spit.  It wasn't intentional; it
only goes into effect when it rains and water is sucked into the air
cleaner I have mounted in front of the radiator!  8^)

Joe

"Simmons, Reid W" wrote:
> 
> Yeah, water injection.  Didn't passenger jets use water injection during
> take-off for increased power?  I also seem to remember J.C. Whitney selling
> something like a water injection system for increased power (and fuel
> mileage?) back in the 60's.  It was one of their "wiz-bang,
> plastic-fantastic, gadgets of the month".
> 
> Reid
> '79 Spitfire (original owner)
> 
>  -----Original Message-----
> From:   David Brock [mailto:davidb@ilx.com]
> Sent:   Wednesday, August 18, 1999 11:46 AM
> To:     spitfires@autox.team.net
> Subject:        RE: decarburizing(?)
> 
> The water trick is what I watched my mechanic friend do in the first weeks I
> owned Bev- except it wasn't sprinkled in- we actually poured over 2 litres
> (half gallon) through the carb throat over the course of about 90 seconds.
> As long as the revs were kept up, it didn't stall, and the black & white
> smoke from the tail pipe, he said, was the soot and steam, depending on
> whether the engine happened to be revving high or low at that moment.
> 
> This cleared up a nagging run-on problem which, he said was due to
> superheated (glowing) carbon deposits in the chambers.  Of course, all
> disclaimers apply.
> 
> ;-David
> 
> -----Original Message-----
> From: wizardz [mailto:wizardz@maxinter.net]
> Subject: Re: decarburizing(?)
> 
> ..another method (although I am sure some will balk at it) is to
> sprinkle/sprits
> water down the throat of the carb while the engine is at operating temp. and
> running.
> ...be careful if you do it this way.... too much water too quickly stalls
> the engine
> and can possibly cool the engine components too quickly.
> But at the same time this is what breaks the carbon loose. The warm metal,
> vs the sudden cooling effect
> on the carbon from the water, cracks it and it blows off.
> 
> (as usual... no warranty expressed or implied... YMMV   my $.02..)

-- 
"If you can't excel with talent, triumph with effort."
 -- Dave Weinbaum in National Enquirer

<Prev in Thread] Current Thread [Next in Thread>