spitfires
[Top] [All Lists]

Wheel Nuts Measurements

To: "triumphs-owner@autox.team.net" <triumphs-owner@Autox.Team.Net>,
Subject: Wheel Nuts Measurements
From: Jerry <lensman@erols.com>
Date: Sun, 06 Sep 1998 00:55:16 -0400
I'm ready to put the COSMIC mags back onto my GT6.  Problem is that I
don't have MAG wheel nuts only the stock ones.  I've used them before
with no real problem but would feel better using a mag wheel lug nut
instead.  I was looking through the catalogues from Rimmer Bros. and
British Victoria and wondering if maybe I couldn't use the nuts listed
for the Panasport (MiniLight) wheels.  Can anybody give me the
measurements of the nuts for these wheels.  I most interested in the
thickness of the nut as looking at the hole in the mag in relation to
wheel stud I figure there is only a couple of millimeters to room.  Any
info is appreciated.  I don't want to drill the mag if possible.

Jerry - 1968 GT-6 Mk1



<Prev in Thread] Current Thread [Next in Thread>
  • Wheel Nuts Measurements, Jerry <=