Re: Mark 4 sway bar on Mark 3

["Michael Bayrock" <michael_bayrock@bctinet.bctransit.com>]

     I put the 1500 swaybar on my '71 GT6+.  I did use the original u-bolts 
     and the hole spacing on the frame, but ended up bending everything to 
     get it to fit.
     
     I'd suggest that you get new u-bolts and clamps to fit the sway bar 
     and to 'ovalize' the frame mountings to get them to fit properly.
     
     Just my $0.25CDN (about $0.12US!)
     
     Michael
     michael_bayrock@bctransit.com


Subject: Mark 4 sway bar on Mark 3
Author:  ctschmitz@ccgate.hac.com at BCT-INTERNET
Date:    4/7/98 12:28 PM


     
     Hi guys - 
     
     A question for those in the know - 
     
     I'd like to put the larger sway bar (7/8") on my 1970 Spit. Does any 
     body know if the later model U-Bolts and bushings will fit on the 1970 
     chassis? In other words, is the hole spacing on the sway bar mounting 
     plate the same for all Spits?
     
     TIA
     
     Tom