Sounds good. Is rigid conduit and couplings
suitable for outdoor use? Thanks.
-Steve T.
At 12:53 PM 6/4/2024, Pat Horne wrote:
>Steve, you should be able to make an extension
>from a piece of rigid metal conduit. It will be
>threaded on both ends & will need a coupling to
>connect to the fixture. EMT conduit would
>probably be too light unless you only need an inch or two extension.
>
>Peace, Pat
>
>Pat Horne
>We support Habitat for Humanity
>
>
>On Jun 4, 2024, at 11:39â?¯AM, Steven Trovato <strovato@optonline.net> wrote:
>
>Outside my shop I have a typical flood light with two of these:
>
>https://www.lowes.com/pd/Sigma-Electric-2-25-in-LED-Gray-Switch-Controlled-Floodlight/3136837
>
>Is there any way to extend the part with the
>threaded end? Through some bad planning, one of
>the lights is blocked by the gutter
>downspout. I would like to extend it out from
>there. If the wires need to be longer I can
>figure out how to do that. Whatever I do will
>have to be suitable for outdoor use. Moving the
>downspout would be difficult. I can also
>relocate the whole light, but some sort of
>extension arm would be the quickest and easiest
>solution of it is possible. Thanks.
>
>-Steve T.
>
>
>
>--
>This email has been checked for viruses by Avast antivirus software.
>www.avast.com
>_______________________________________________
>
>Shop-talk@autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation $12.96
>Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
>
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
utox.team.net
|