shop-talk
[Top] [All Lists]

Re: [Shop-talk] tubing bender dies

To: Dave <dave1massey@cs.com>
Subject: Re: [Shop-talk] tubing bender dies
From: Brad Kahler <bkahler1@gmail.com>
Date: Wed, 18 May 2016 16:30:49 -0400
Cc: Shop Talk List <shop-talk@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
References: <CADm3DLGwo83NLUCK=xU-f0=5fRmB2YKTLN3VWUnYYT0XNYOLyA@mail.gmail.com> <154c589ae40-5a3b-2791d@webprd-m82.mail.aol.com>
Dave,

That's not a bad idea, unfortunately I just checked and all of the
pulleys designed for 5/8" rope are pretty darn expensive and I would
need at least two of them :(

For the moment John's idea of how to make the pulleys is probably the
easiest/cheapest approach.




On Wed, May 18, 2016 at 4:23 PM, Dave <dave1massey@cs.com> wrote:
> Why not just buy some rope pulleys of the right diameter?
>
> http://www.mcmaster.com/#rope-pulleys/=12guu0a
>
>
> Dave Massey
>
>
>
> -----Original Message-----
> From: Brad Kahler <bkahler1@gmail.com>
> To: Shop Talk List <shop-talk@autox.team.net>
> Sent: Wed, May 18, 2016 11:26 am
> Subject: [Shop-talk] tubing bender dies
>
>
> I now have a need to bend some 5/8" diameter OD 1/16" wall tubing.
> I've been shopping around for dies but the prices I'm finding are
> fairly high for a one time need to make a couple of bends.
_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>