That sounds like the explanation I got. I'll certainly find out. Hope to do
this next weekend.
Thanks.
Sent from my iPhone
> On Jul 2, 2015, at 3:17 PM, Jack Brooks <jibrooks@live.com> wrote:
>
> -----Original Message-----
>
> From: "Jack Brooks" <jibrooks@live.com>
> Sent: July 2, 2015 6:13 PM
> To: "Ian McFetridge" <shop-talk2@mcfetridge.org>, "Jim Stone"
> <1789alpine@gmail.com>
> Cc: "Shop Talk" <shop-talk@autox.team.net>
> Subject: Re: [Shop-talk] Brake Pads
>
> You may have a band of rust intruding from the outer edge into the path of
the
> pad. In this case, the rotor is toast and must be replaced. I have this on
a
> chevy I own.
>
> Jack
>
> --- Original Message ---
>
> From: "Ian McFetridge" <shop-talk2@mcfetridge.org>
> Sent: July 2, 2015 4:23 PM
> To: "Jim Stone" <1789alpine@gmail.com>
> Cc: "Shop Talk" <shop-talk@autox.team.net>
> Subject: Re: [Shop-talk] Brake Pads
>
> I think the reason most shops turn rotors is to get rid of uneven brake pad
> deposits that will cause chatter/vibration/pulsing. You could cleanup the
> rotors with a 3M scotch brite pad (also have them for drills). I use a
> flex hone to clean-up my rotors before new pads.
http://amzn.com/B007INTEFY
>
>
> Ian
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/jibrooks@live.com
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/1789alpine@gmail.com
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|