shop-talk
[Top] [All Lists]

Re: [Shop-talk] Grinder pedestal

To: Doug Braun <doug@dougbraun.com>
Subject: Re: [Shop-talk] Grinder pedestal
From: Brad Kahler <bkahler1@gmail.com>
Date: Tue, 10 Feb 2015 06:27:33 -0500
Cc: Shop Talk List <shop-talk@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
References: <CADm3DLH5FaWrMcDtQUrwz2b9kVuAFZaPCJi0-pH87q0JoFXcpQ@mail.gmail.com> <CAOtbU9UWU7_ZRZp4GQ4QBKMuBJm826kBGBuyqU9VhHN_knYx1g@mail.gmail.com>
Doug, interesting idea.  I've got one of the Black & Decker Workmate
benches and some plywood laying around.  I might give it a try before
spending money on wheels and pipes.

Thanks!

Brad


On Mon, Feb 9, 2015 at 9:36 PM, Doug Braun <doug@dougbraun.com> wrote:

> I have one of those Craftsman folding workbenches with the two-piece
> clamping top surface.
> It is pretty stable.  I also have several benchtop tools, like a small
> router table, a small band saw, and a buffer.
> I mounted each of these tools on a a 14" x 24" piece of plywood with an
> additional 2" wide strip running across
> the underside.  To use a tool, I put it on top of the workbench with the
> 2" strip between the two pieces of
> workbench table, so it can be clamped in place.  The tools that are not
> being used live on some shelving brackets
> on my garage wall.
>
> This system has worked well for me.
>
> Doug
_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>