*I guess I'm a cheap patient person but I deal with 100 x 200 foot lot (1/2
acre) when it gets out of hand and 2 feet high just by raising the cutting
height to the top and grinding around in low gear taking a half swath when
it's REALLY heavy. Use the chute instead of the bag and throw the cut
material to the outside. After a few days of drying* * time, go back over
to shred the clippings. I use a LawnBoy 12 hp rider with a single blade.
Takes about an hour and I use the cup holder for a Bud.*
On 29 May 2013 15:28, Jeff Scarbrough <email@example.com> wrote:
> On Wed, May 29, 2013 at 3:27 PM, John Niolon <firstname.lastname@example.org> wrote:
> > jim,
> > they are called 'walk-behinds... and the little sulky is an accessory...
> > here's a link
> I used to have an old David Bradley 2-wheel tractor with a sickle bar
> mower, whih would be good for that task, as well as satisfying one's
> needs for tinkering on old machinery.
> Tractor: http://www.w-t-p.com/2005/D03-7937.jpg
> Mower: http://thumbs1.ebaystatic.com/d/l225/m/maOwxo9R2-PZsUrtEHoL8kQ.jpg
> You might be able to find something like that cheap, if you're so
> inclined. Otherwise, get someone to bush hog it twice a year.
> Jeff Scarbrough
> Corrosion Acres, Ga.
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums