What spans do you have between joists, what thickness of plywood were
you planning, and what type of use are you planning for the floor?
At first I was wondering why you would need T&G, but the answers to the
questions above would help to define that. And then I thought that if
you really wanted T&G you could just set up a router and after ripping
the plywood to 2' widths you could add your own T&G.
The way the house is constructed I can't get a 4x8 sheet into the attic. I can
do a 4x4 and with some effort a 2x8, but none of those are t&g.
Any options out there besides using some kind of Simpson Tie in place of the
t&g edge support?
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net
|