shop-talk
[Top] [All Lists]

[Shop-talk] Identifying taper and threading attachments on a

Subject: [Shop-talk] Identifying taper and threading attachments on a
From: neiljsherry at talktalk.net (Neil Sherry)
Date: Sat, 22 Oct 2011 00:26:00 +0100
References: <mailman.18.1318960808.11683.shop-talk@autox.team.net><1B9FB4B4C85C43988CF6533A293A8F6D@EnergyKinetics.EKnet><65884CFF6F01482B99CD50CD5947BC69@HP62011><7520E99DCA554F72827DAE1E259B3768@EnergyKinetics.EKnet><B8677E2507954B69BD9E4BD02B86E23F@HP62011><4E9F8126.3000707@frontier.com><053901cc8eed$60943220$0501a8c0@randall> <4EA14BD4.5000009@talktalk.net> <06b501cc9009$a1ea6420$0501a8c0@randall>
...luckily the lathe in question had a Camlock mounting (and my own 
lathe has a keyed taper lock mounting).


On 21/10/2011 16:53, Randall wrote:
>> The other thing I have done on light threads is to run the lathe
>> backwards
> Not a good idea if your chuck screws onto the headstock (as mine does).
>
> -- Randall
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/shop-talk/neiljsherry at talktalk.net

<Prev in Thread] Current Thread [Next in Thread>