shop-talk
[Top] [All Lists]

Re: [Shop-talk] Identifying taper and threading attachments on a

To: shop-talk@autox.team.net
Subject: Re: [Shop-talk] Identifying taper and threading attachments on a
From: Neil Sherry <neiljsherry@talktalk.net>
Date: Sat, 22 Oct 2011 00:26:00 +0100
...luckily the lathe in question had a Camlock mounting (and my own 
lathe has a keyed taper lock mounting).


On 21/10/2011 16:53, Randall wrote:
>> The other thing I have done on light threads is to run the lathe
>> backwards
> Not a good idea if your chuck screws onto the headstock (as mine does).
>
> -- Randall
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/shop-talk/neiljsherry@talktalk.net
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>