Doug - A wire wheel in an angle grinder will make it all go away real
fast. Do it outside when there is a breeze and wear a dust mask or
respirator in addition to goggles. It will also save you having to
sandblast everything except inside corners and you can easily get all
the open areas down to clean metal.
Brian
On 10/19/2011 4:45 PM, Douglas Braun wrote:
> Hello,
>
> I have an old fender (for a '31 Ford) that has a coat of bondo about 1/8"
> thick all over it. Does anybody
> know a good way to remove it? I will eventually sandblast the fender, but I
> am worried that the bondo
> will be resistant to sandblasting, sort of the way rubber or some plastics
> are.
>
> Does methylene chloride paint stripper attack the stuff? How about burning
> it off?
>
> Thanks,
> Doug
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/bk13 at
> earthlink.net
|