shop-talk
[Top] [All Lists]

Re: [Shop-talk] nicad battery replacement

To: john niolon <jniolon@bham.rr.com>
Subject: Re: [Shop-talk] nicad battery replacement
From: Douglas Braun <doug@dougbraun.com>
Date: Tue, 3 May 2011 16:43:11 -0400
I did exactly this a couple of years ago.  I had to do a very tiny bit
of carving with an X-acto knife where the battery plugs into the drill
to ensure it would fit smoothly.  The drill has worked fine with the
more powerful battery.  If you like I can check the model numbers of
the recommended and new batteries.

BTW, the charger was designed to work with various battery voltages,
and worked fine.

Doug

On Tue, May 3, 2011 at 3:33 PM, john niolon <jniolon@bham.rr.com> wrote:
> I've got a Crapsman cordless drill  18 volt.
> batteries are dead and won't take a charge
> I have some 19.2 volt crapsman batteries from another drill
> can you use the 19.2s in the 18 volt drill without screwing anything up ??
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>