shop-talk
[Top] [All Lists]

[Shop-talk] Replacing a breaker?

Subject: [Shop-talk] Replacing a breaker?
From: tr3driver at ca.rr.com (Randall)
Date: Thu, 7 Apr 2011 11:29:44 -0700
References: <151942.796.qm@web161406.mail.bf1.yahoo.com> <4D9DE94E.9000408@gmail.com> <4D9DF93E.3090103@xxiii.com>
> Even though almost all brands of breakers and panels are mechanically
> interchangeable, you have to match brands and products to be NEC
> compliant.

Around here, there are at least 3 major lines that are not compatible.  Two
of them can be found in stores (one is Murray, I forget the other offhand,
maybe Square-D or GE).  My 1968 addition was wired with a third type,
Federal Pacific.

Turns out that Federal Pacific cheated on their type acceptance tests, and
many of their breakers are faulty.  Fortunately I asked a contractor friend
of mine where to buy them, and he clued me in.  I replaced the entire
subpanel.

http://www.inspectapedia.com/fpe/reliance.htm

-- Randall 

<Prev in Thread] Current Thread [Next in Thread>