On 12/17/2010 2:39 PM, Eric Murray wrote:
> I have a tailpipe that I need to cut to get out of the car.
> It's stainless, 3" diameter. I'm putting a rorty exhaust on my Mazdaspeed3.
>
> I have a sawz-all, an air die grinder and an angle grinder.
>
> Which is the best tool to use (cutoff wheel in the grinders).
Sawzall, good 18-24TPI blades, lots of lubricating oil.
If you've got room for the blade travel.
Try to make sure to get the end square.
John.
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|