shop-talk
[Top] [All Lists]

Re: [Shop-talk] How to remove corroded batteries from an Aluminum

To: shop-talk@autox.team.net
Subject: Re: [Shop-talk] How to remove corroded batteries from an Aluminum
From: eric@megageek.com
Date: Mon, 1 Feb 2010 05:42:36 +0430
I had this happen to me a while ago.

I just removed the top and bottom part of the flashlight and was able to 
hit the batteries out.  It's a mess, but the flashlight is salvageable!

Moose
"Be as beneficent as the sun or the sea, but if your rights as a rational 
being are trenched on, die on the first inch of your territory." Ralph 
Waldo Emerson



"J.C. Hassall" <jhassall@blacksburg.net> 
Sent by: shop-talk-bounces@autox.team.net
02/01/2010 05:31

To
shop-talk@autox.team.net
cc

Subject
[Shop-talk] How to remove corroded batteries from an Aluminum case






We found the long-AWOL Maglite, only to find that the alkaline batteries 
went TU a looooong time ago and are badly corroded into the case.  I've 
picked away as much loose corrosion as possible, but those babies seem 
to be welded in there.  What's a good way to extricate the batteries?  I 
suspect it'll require a chemical solution, as I ran a couple of sheet 
metal screws into the rear battery case and tried to pull, no joy.

tia

jim
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Suggested annual donation $12.96


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>