I worry about cyanoacrylates (crazy glue) as being too brittle - are some
grades more flexible ?
Someone on the MG T-Series list suggested green Loctite 290 - I think that's
the one for already-assembled fasteners. Anyone ever use that as a sealant
??
I don't think of Loctite thread lockers as sealants, but I suppose...
Thanks !
Karl
> You might try low-viscosity crazy-glue. The best low-viscosity kind
> can be
> gotten from a hobby shop.
>
> Doug
>
>
>>
>> >My MGTC's rear axle housing is a
> partially riveted
>> assembly. A few rivets
>> >were leaking when I took it
> apart, and now that it's
>> stripped and mostly
>> >clean, I have a good chance
> to seal all of the rivets.
>> ........
>>
>> >What else might flow into there,
> not be bothered by a
>> little residual oil, and
>> >seal the rivets ?
>>
>>
> Karl,
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as kvacek@ameritech.net
>
> Shop-talk mailing list
>
> http://autox.team.net/mailman/listinfo/shop-talk
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|