shop-talk
[Top] [All Lists]

Re: [Shop-talk] running ethernet wires

To: <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] running ethernet wires
From: "Jack Brooks" <jibjib@att.net>
Date: Tue, 7 Apr 2009 22:56:31 -0700
I'll second David' suggestion for www.monoprice.com.  Excellent source.
I'll also second his suggestion to buy the patch cables, especially from a
patch panel to a switch.

Wired versus wireless: We can run the same video file from our home server
onto two wireless desktop machines just fine, but when I back anything up
and it goes wireless instead of wired, the difference is apparent.  Wired,
even 100 Mbps, blows wireless away in the data transfer arena.  I will be
wiring the house shortly using Gigabit (1,000 Mbps) switches.  Wireless is
not even in the same league.

Jack  

-----Original Message-----
From: shop-talk-bounces@autox.team.net
[mailto:shop-talk-bounces@autox.team.net] On Behalf Of David Scheidt
Sent: Tuesday, April 07, 2009 10:08 AM
To: Mark Andy
Cc: shop-talk@autox.team.net
Subject: Re: [Shop-talk] running ethernet wires

On Tue, Apr 7, 2009 at 12:18 PM, Mark Andy <mark@sccaprepared.com> wrote:
> Howdy,
>
> I need a higher speed network connection from my office (where my 'server'
> pc lives) to the living room (where my PS3 lives) to stream video, etc.
>
> Is there anything magical or to watch out for in terms of running 
> ethernet wires, or is it a trip to Lowes/HD to buy some ethernet 
> cable, some connectors / baseboard plates, and a cheapo crimper?
>
> Even if I get energetic and run wires to other rooms, I'm probably 
> going to be running < 10 wires.
>
> I know I need switches etc. to connect to the network. I'm fine with 
> that stuff. B Its the "how do I connect an RJ-whatever connector to 
> the ethernet cable and what spec ethernet cable do I want" part I 
> could use some advice on, if its not going to be obvious at Lowes/HD.

If you're doing fixed wiring, with jacks in wall plates, this is a
reasonable way to go.  (Though you'll pay a substantial premium for buying
from the Borg.)  If what you're planning on doing is running patch cables,
then do yourself a favor, and buy them.  They're as cheap as buying the wire
and connectors, or even cheaper; they're done by machine, so they're loads
more reliable.  And, if you're doing fixed wiring, buy your patch cables.
Resist the temptation to buy them from the Borg or an electronics Borg, and
you'll save a bunch of money.

I get most of my small quantity cabling from http://www.monoprice.com these
days.  very good prices, shipping charges that reflect reality, and fast
service.



--
David Scheidt
dmscheidt@gmail.com
You are subscribed as jibjib@att.net

Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>