shop-talk
[Top] [All Lists]

Re: [Shop-talk] 1" hole through cinder block ?

To: "Shop-Talk" <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] 1" hole through cinder block ?
From: "Nolan" <opposumking@verizon.net>
Date: Tue, 17 Jun 2008 14:43:07 -0400
> Any suggestions for how to cut an approximately 1.25" diameter hole 
> through
> the block, with the least risk of breaking the whole thing in half ?


True cinderblocks and the like are quite soft, and a simple masonry bit 
spinning in a regular drill will go through it quite readily.  Now if it's a 
true cement block, those are quite a bit harder, and you are likely to find 
yourself needing an impact hammer. 
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>