shop-talk
[Top] [All Lists]

Re: [Shop-talk] Welding Questions: galvanized

To: "'Trevor Boicey'" <trevor@boicey.com>, "'Marc'" <smarc@smarc.net>
Subject: Re: [Shop-talk] Welding Questions: galvanized
From: "Paul Mele" <paul.mele@usermail.com>
Date: Sat, 10 May 2008 01:41:45 -0400
a 40-60 grit sanding disk on a 7 or 9 inch grinder will take off the zinc in
a few seconds.  I'm sure someone knows the exact thickness, but I'll guess
it's only a few mils.

PM
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Shop-talk] Welding Questions: galvanized, Paul Mele <=