shop-talk
[Top] [All Lists]

Re: [Shop-talk] Staining a new wood fence

To: "Patton Dickson" <57healey@gmail.com>, "shop-talk"
Subject: Re: [Shop-talk] Staining a new wood fence
From: "john niolon" <jniolon@bham.rr.com>
Date: Tue, 15 Apr 2008 13:29:51 -0500
if'n it were me...   I'd do all the raw materials first with a roller or spray
coat or two... then after the fence was erected, I'd go back over the cut ends
and then give it a light 2nd spray coat...

john
  ----- Original Message -----
  From: Patton Dickson
  To: john niolon
  Cc: shop-talk
  Sent: Tuesday, April 15, 2008 1:23 PM
  Subject: Re: [Shop-talk] Staining a new wood fence


  From scratch, 8ft side by side with a kicker board


  On Tue, Apr 15, 2008 at 12:51 PM, john niolon <jniolon@bham.rr.com> wrote:

    are you going to build from scratch or buy the prebuilt sections ???

    john



    --
    Patton Dickson - http://Austin-Healeys.com - Plano, TX
    1957 Austin-Healey 100-Six "Built to run 'til the road wears out."
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>