Maybe drill all the way through the tile and then use long tapcons to anchor
the sill plate to the concrete below the tile? Even better, make sure that
the sills line up with grout-lines and drill through that. Then, when you
tear it down you can back the tapcons out and regrout without leaving big
holes in your pretty tile garage floor.
-Paul
On Dec 11, 2007 6:01 PM, cornerexit <cornerexit@gmail.com> wrote:
> I need to put up three short non-load bearing interior walls in my garage
> to
> make an office space for my wife. Nothing fancy, just some walls to
> provide
> some privacy and quiet for her office work. I'm considering these to be
> temporary as we may need to pull them out when we sell the place as I
> think
> having a real two car garage is more salable then half a garage with a
> make-shift room in it. I don't want to use office partitions; I want 2x4
> framed, sheet-rocked walls with one door opening.
>
>
>
> The previous owner of this house was a tile contractor, and thus just
> about
> everything that could be covered with tile IS covered with tile, including
> the mail box post and the garage floor. If I were setting these walls on a
> typical concrete floor I'd drill holes in the sill plate and shoot those
> nail anchors in that you use the little .22 caliber anchor gun for (can't
> remember the proper name, but I have one around here somewhere).
>
>
>
> Should I try this same method for anchoring the walls to the tile floor?
> Or
> maybe drill beyond the tile into the concrete and try to use an extra long
> anchor if they make such a thing? Is there another method to anchor wall
> sections to a tile floor?
>
>
>
> Thanks
>
> Wayne
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as parkanzky@gmail.com
>
> Shop-talk mailing list
>
> http://autox.team.net/mailman/listinfo/shop-talk
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|