shop-talk
[Top] [All Lists]

Re: [Shop-talk] Air compressor hook up

To: "'shop-talk List'" <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Air compressor hook up
From: "Bill Gingerich" <bill@gingerich.us>
Date: Thu, 5 Jul 2007 07:55:36 -0500
I don't know for sure if the oil makes much difference, but why take the
chance?  I found Ingersoll Rand synthetic oil at a local tool supplier for
$7.00 a quart.  Sounds like a lot, but since my 7 HP 80 gallon 2 stage unit
uses 2 quarts, $14 wasn't that bad.  Seemed like cheap "insurance" to me.

BillG
OKC   

-----Original Message-----
From: shop-talk-bounces@autox.team.net
[mailto:shop-talk-bounces@autox.team.net] On Behalf Of Randall
Sent: Wednesday, July 04, 2007 11:49 PM
To: 'shop-talk List'
Subject: Re: [Shop-talk] Air compressor hook up

> None of the hardware 
> stores sell a separate disconnect (other than an AC "pull 
> out" disconnect) so I wonder what you folks do?

I'm surprised you can't find them in the hardware store ... I'd pick one up
on eBay.

> The thing was also shipped, according to the manual, without 
> oil, although a little is showing in the sight glass.

Should probably be drained & replaced.

> able to get a couple of quarts of "compressor oil" but I 
> suspect 20 or 30 ND would work just as well.  Any opinions?  

A big compressor is still on my wish list; but my little "2.5hp" (which in
reality is closer to 1 hp) seems happier with synthetic motor oil.  Since
it's only air leaking past the rings, I don't think choice of oil is as
critical as it might be for a car motor.

Randall
_______________________________________________

Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

<Prev in Thread] Current Thread [Next in Thread>